Cookie Notification

We use cookies to personalize your experience. Learn more here.

I Accept
I Don't Accept
Report this product
We regularly adjust ratings based on user feedback and product reviews. We update ratings to better inform our readers. Our goal is to be a trusted source of information, and we want to protect you from products and brands with major issues.After receiving negative feedback from users about a product, the Gadget Flow team will take another look at it and ensure the review’s credibility.
4+7 =

FormMount Phone Magnetic Smartphone Bike Mount

Effortlessly secure your phone to your bike with the FormMount Phone Magnetic Smartphone Bike Mount. Using the power of four neodymium magnets, this minimalist mounting system gives you total peace of mind and convenience without the bulk. The FormMount Phone includes the mount for your bike as well as an easily installed back panel for your smartphone. The panel stays in place with the included ultra-strong 3M adhesive. The super thin panel also features four symmetrically placed circular protrusions. These align perfectly with the indents on the bike mount. When you want to mount your phone, simply place it down. The strong magnets will pull the back plate into place, positioning your smartphone right where you need it. The FormMount Phone can handle it all while keeping your device safe, including rides of 17mph down railroad tracks. In addition, you can have your smartphone in either portrait or landscape mode to suit your needs.

FormMount Phone Magnetic Smartphone Bike Mount
Share it
Discovered On
Discovered By
Ashley Timms
Show Product Specs
4x Neodymium Magnets
Viewing Options
Landscape, Portrait
Intuitive Design, Minimalist
Report this
Kickstarter Comments (26)
Write your comment..
Sign up to leave a comment.
Click here to tag users that participate in this comment thread.
Click here to upload an image or gif.
Click or drag your image here (Maximum Size 4MB, Accepted formats JPG, PNG, GIF).
Add an emoji to your comment.
Click here to add a gif from to your comment.
Search for gifs
powered by Giphy
Hi, are the shipments to Germany out yet? I didn't get any shipping notification.
F3 Cycling - Chicago, IL
Hi Boris,
Yes, your FormMount Phone has shipped. I will send your tracking number to the address that you have in Kickstarter. Thank you for supporting us!
Boris Valnert
Hi, Any news in regards of shipping? I am from DK and yet to receive a Shipping notification.
F3 Cycling - Chicago, IL
Hi Roy, Yours shipped on June 11th. I just sent your tracking number to the address you have in Kickstarter. Thank you for supporting us! Tim
Roy S. Askins
Should I have received a shipment notification? I haven’t received anything as of today. Thanks.
F3 Cycling - Chicago, IL
Thanks Scott!
Scott Cooper
Wow those are some seriously powerful magnets I’m guessing my phone will survive the crash...
anyway great job guys!!
Love the mount!
F3 Cycling - Chicago, IL
Received, 2 plates added, package going today!
Russell Dean
I've just sent $20, can you confirm you've received the money, and will you send me a tracking number once my pledge has shipped?
F3 Cycling - Chicago, IL
Russell, Yours is going out today. We can get extra plates in there if you like. Just paypal $10 each to Thank you!
Russell Dean
Hi can you let me know if my mount has been shipped I'd like to add the extra plate(s) to my from your comment below if it's not too late?
F3 Cycling
We opted not to use BackerKit this time around in the interest of getting rewards out to people more quickly. That said, we will honor our offer of allowing the purchase of extra case plates as long as your order has not yet shipped. We are starting shipping tomorrow (actually delivering to the post office) so, if anyone wants an extra case plate, please PayPal $10.00 (35% off) to and we will include it. This will have to happen fast, as we are rolling and once sealed, the orange boxes are flying!
Russell Dean
From the reply below, the survey was going to be sent via Backerkit, why has it not been sent via Backerkit? We will now have to get the extra case plates via the website and now pay more for international shipping. Thanks
That's great - thanks!
F3 Cycling - Chicago, IL
Good Point Numba.Ninja. We will offer additional case plates as an add-on in BackerKit (our planned method of fullfillment). We will figure out the price, but it will be discounted for our Kickstarter backers. Maybe people also have multiple cases. Thanks for bringing this up
As international delivery is expensive will we be able to order these as an add-on for this campaign, to get spares delivered within the same parcel? And how much will they cost?
F3 Cycling - Chicago, IL
Hi and BlueAntec. We apply the adhesive in the factory and the case plate is engineered to specific tolerences so the interface is very secure. We feel that forcefully removing the case from your phone case could cause unwanted bending and user application of the adhesive leaves room for error.
Because of this, we will have case plates available on our site, however we will not be offering the adhesive only. Thank you for your understanding and supporting F3 Cycling.
I think you should reply to @BlueAntec's question very soon, as this is an important consideration for all backers before this campaign ends. On April 21st you said you would have an answer very soon. That was 25 days ago now and the campaign has less than 24 hours left to run now!
Rob States
This comment has been removed by Kickstarter.
Frank Pistorio
@ BlueAntec - We are evaluating selling the adhesive separately, however, it's applied to the case plate at the factory in a controlled process. Our concern is the possibility you could get an uneven bond by reusing a case plate that has been bent by forcefully removing it from your phone case.
We 100% support all our products, and will have replacement phone mount parts available. We should have an answer to you shortly regarding how we will make a replacement available, either adhesive separately, or attached to case plate.
What happens when a phone upgrade/replacement is made? Would we have to buy an new mount for the back of the phone or is the mount reusable? If it's required to buy a new mount for the back of the phone, how much will they cost?
F3 Cycling
Hi Duane,
Wireless charging is very sensitive and we understand that it can be a challenge even with thin cases. Hopefully it becomes more reliable as the technology improves.    
F3 Cycling
Sorry for the late reply Russell and Minh. We did not set the the early bird to buy 2 packs to give more people the opportunity to take advantage of the early bird price. Backing 2 mounts is only $4 more. As for FormMount, that was a 2016 campaign that has been selling all over the world since then. It will not be offered in Backerkit, but you can buy on
Russell Dean
Hi, I'd like to add an extra mount too with the early bird pricing also will you make the Form Mount available via Backerkit at Kickstarter prices?
Minh Nguyen
Hi I’m a returning customer from your last mount and just wondering if I was to order 2 of the EB mounts, can I just up my pledge by $40 since the 2 pk is more expensive. Thanks
Have you checked if the wireless charging is affected by the plate fixed to the phone?. It seems thin enough not to cause problems.
Sign up for Gadget Flow Get Started