Get the job done right when you have the Magnet Driver DDN Total Tool. This all-in-one tool lets you drill, drive, and nail like a total pro. The Magnet Driver DDN packs all of these functions into one compact unit. In addition, it comes with all of the accessories you need for everything from repairs to DIY. In fact, there are a total of 41 different functions. The Magnet Driver DDN works with one hand for effortless use. But, the power of this tool lies in the magnets. Simply slide one of the five Magnet Drivers over the end. This powerful magnet then holds your screw perfectly in place so you can drill with total precision. Each screw holder is color-coded based on diameter to make light of any job. Plus, the magnets keep everything in order. You don’t have to worry about fallen or lost screws and nails. And, you can even use it to recover metal objects.
x
I guess right after the project gets funded ?
Hello, if I order this wonderful Magnet Driver, how soon can I receive it?
$50 add on (extra pack of DDN accessories) includes:
5 x Drill Bits 10in1: 5/16", 1/4", 1/4", 3/16", 5/32"
12 x Double Bits: PH 1-2, PH 1-2, SL 4-6, PZ 1-2, SQ 1-2, HEX 2-2.5, HEX 3-4, HEX 5-6, TX 10-15, TX 20-25, TX 20-25, TX 30-40
3 x Orange Magnet Driver™
2 x Ring Stopper PRO
Regards,
Micaton Team
At first thank you very much for your support and I hope that the answer to your question will help the other backers, because maybe it was not explained enough.
All our tools are valid for all countries. As you can see we have included many double bits with different tips in order to do the most common screwing tasks worldwide. In regard to the the drill bits, its correspondence US/EU is as follows:
5/32" = 4mm
3/16" = 5mm
1/4" = 6,5mm
5/16" = 8mm
That means all the countries have a solution with these drill bits. The bit nail holder is also valid for all countries. The bit holder drill&drive and our handle will help to work with all these accessories. Thank you again to all our backers for your support.
Michael W.
Our bit holder drill&drive is compatible with 1/4" Hex. connection accessories. If your sockets has got this connection will fit perfectly. Otherwise you need a small adaptor 1/4" Hex./Square which you can get easily.
Regards,
Micaton team
In the previous campaign there were 2 versions, one metric for e.g. EU and one for US.
Depending on the answer I will bail out or stay in. If you buy something $99 worth, should be useable no?
Yes, "EVO" is related to the orange magnet attachment to the bit holder and chuck. We´re sorry for the confusion. At the office we use to call that piece Magnet Driver EVO (the evolution of Magnet Driver).
Yes, we are working on a metric version to have it in the future.
pledging on Kickstarter in the morning is not a good combination. Please forgive my blatant blindness!!!
Micaton Team.
Pledges from US, Canada and rest of countries will be shipped directly from US Kind regards. Micaton team
Thanks